Mitered Corner Cheat

My assistant Hannah came up with this brilliant idea for cutting the corner in prep for sewing a mitered corner on these table runners. She took the clipping from the first runner she did and used it as a template for all the other corners for the rest of the runners! BRILLIANT!! I would have measured every single corner. LOL

Advertisements

The table runners that just won’t end

So back in February I took a job for 28 table runners for a charity. They requested a discounted rate because it was a charity. I agreed because it was the spouse of one of my regular clients. Unfortunately, I under quoted the time the job would take and ended up in the hole on this huge project. Aside from that my assistant Hannah and myself have had problem after problem with this awful fabric my client bought at SAS Fabrics here in Arizona. They are a warehouse style fabric shop that often has a lot of manufacturer defect or overstock fabric. We first noticed issues with it when we did the first three runners as samples. The fabric is a polyester/rayon heavy satin with huge blue and white stripes running parallel to the lengthwise grain. For the life of me I couldn’t understand why they were bubbling in the middle and not laying flat. We tried every sewing trick I know and some I looked up to try to create the best situation for them to come out flat. It didn’t seem hard since we were just hemming the fabric in a giant rectangle. We pressed it, we starched it, we pinned it, we tried a satin foot, we tried a walking foot. Nothing seemed to work. So finally I decided they were just going to be funky and we just moved on and kept sewing them. Half way though the bolt of 25 yards we noticed that the stripes were not where they were when we started. When the stripes were printed on the fabric they were not straight. It looks like the fabric moved while they printed it and the result was spiral stripes the length of the whole bolt! Since we need to the strips to run the length of the runners and not across the runners, the runners were twisted!! Bubbling problem solved! Ugh I was so irritated about it. It wasn’t anyone fault and you wouldn’t have been able to tell just by looking at the bolt. If we had used to the stripes in the other direction it might not have been an issue but the runners would have looked a little prison-y. Anyway, we’re down to the last one today and I’ll be happy when this job is done and we can start working on costumes.

Here is a picture of the last of the two 40 foot runners we had to do. We had 26 7 foot by 14″ runners and two 40 foot by 14″ runners. Process is: Starch and press, press and pin hem, sew, and press again. 40 FEET OF IT!!!