Have a client who has had me putting floral embroidery on a lot of ready-made clothes lately. This is a rose design I’m making for her. I couldn’t find a built-in rose file in my embroidery software. It comes with so many pre-made designs that I am really surprised it didn’t have a basic rose. I found this embroidery design picture of a full rose and re-digitized it into the different parts, the rose head, the stems, and the leaves.
I liked the way the shadowing in the rose is created by the stitch design. The stitch type is a Satin Special. It’s used for pieces that are too wide for a satin stitch to look good or stitch out correctly. It creates one or two stitches across the width of the design and gives it those dimples.
This is how my rose came out. I did it with only one color to save some time embroidering it.
After creating the head of the rose, I took the vines off the original picture and played around with some different sized roses. I ended up adding more thorns and changing the leave directions to make it a bit more interesting.
I’m still not finished with the designs. I’ll probably make a separate, just vines, design so that way I can place some vines on the garment near or connecting two different designs.
Sometimes clients don’t have the original image file for a design. In this case, he had the original embroidery to work from. I just took a picture of the design and measured the dimensions and digitized it from there. It was a little tricky because the stitching was distorted from wear and tear and faded. I think it came out pretty good for being a copy of stitches. I think the size could use some tweaking though. I think it came out too wide.
Most of what I love about my business are the interesting challenges that my clients provide me. Some of my favorites include sewing things out of the ordinary, like the AstroTurf dog bed that I make last year. Some others have been requests for embroidery on things that weren’t necessarily made to be embroidered on. Such as this car dash cover. Not only was the piece itself daunting but the embroidery they wanted on it was rather complex. This was for one of my regular clients. He does boat and auto upholstery and now offers his clients custom embroidery because he knows me. We’ve been working together intermittently for a few years now. I always welcome his projects because they challenge my sewing and embroidery skills. These one-time creative projects are the best part of my business. If I had to sew the same thing all day I would probably loose my mind.
So here is the embroidery project I had this week. This is the finished piece all ready to go. It is the dash or some cover for part of a vehicle.
This is the set up I had to create just to be able to embroider this giant car cover thing. I raised my ironing board to it’s highest high then place my table top ironing board and my sleeve board on top of that to add extra height. Off on the right side, on top of the filing cabinet, I placed my sewing tote with my hoop master shirt board on top of that. This thing was not just large, but extremely heavy as well. If I had let it hang it would have surely broken my machine.
This is the amazingly complex design I had to digitize for this project. I love getting to stretch my digitizing muscle. I’ve mentioned before in past post about the digitizing process. There are not many resources for learning how to digitize embroidery and the software is extremely expensive. I’ve spent the last 6 years teaching myself through trial and error. So when I get projects like this force me to think outside the box, it helps keep my skills sharp. This design was over 30,000 stitches and had 12 color changes and 7 different colors.
While it was stitching I had to watch it constantly for the almost two hours it took to stitch the design. This was due to both the complexity of the design and the rig I had to keep the giant piece of material in place on the machine.
There were a few things that went wrong with this design that I will change but it looks good enough that a non-embroidery person will probably not notice. The darker gray (pewter) color I chose for the outer wreath is too dark for one. If I stitch this design again I would probably use to pewter where the black is in the wreath and a medium gray for the pewter color. The wreath just feels too dark. I also accidently put the pewter over the yellow part of the center emblem instead of the black that was supposed to be there. That happened because for some reason I thought I could save myself a thread change by replacing two of my standard threads that were already on my machine. But I forgot the design required black as well as the pewter. Both the silver accent lines inside the central design and the thin black line the wraps the bottom of the central design are way too thin. These were all 0.02mm thick and they should have been at least 0.05mm. As a result, the different patches of color are showing through in some places. The most annoying thing I messed up was the stabilizing of this design. Half way through the centerpiece the whole thing started to bow really bad. I had to add two additional layers of heavy stabilizer to compensate. I forgot about the density of the design needed a very firm platform. That did the trick and the rest laid flat. However, I had to press the center with my iron. I placed it on a block of wood and used my wooden clapper to sandwich it in between too hard surfaces once heated. That allowed the fabric under the bulging piece to lay flat.
Overall, this project came out alright. It’s not my best work. Some projects are like that, they just don’t want to get made and will fight you the whole time. This project was definitely a fussy project. Everything from the embroidery file not wanting to load in the machine to the wrong thread color to the thread breaking more times than I could count and for seemingly no reason. But I made it work and I think the customer will be pleased.